Ethernet cable are classified into crossover cables and straight-through cables according to different networking applications.A straight-through cable is a common network cable and widely used. A crossover cable is a special Ethernet cable. Therefore, you can compare an Ethernet crossover cable wit

MPO fiber jumper. The MULTI-Fiber PushOn (MPO) connector is one of the MT series connectors. The MT series connectors use two 0.7mm diameter guide holes on the end face of the core to accurately connect the guide PIN (also called the PIN). MPO connector and fiber optic cable processing can produce v

Overview of ADSS cableWhen installing ADSS optical cables, it is necessary to comprehensively consider a variety of factors, including sag, distance and external environmental conditions, etc., and clarify the amount of optical cables and erection methods. The mechanical strength of ADSS optical cab

According to fiber properties, fiber transceivers can be divided into multi-mode fiber transceivers and single-mode fiber transceivers.Due to the different optical fibers used, the transceiver can transmit different distances. Multi-mode fiber can only cover a distance of 2 km to 5 km due to the sho

The difference between a Way splitter and way tap1. The way splitter of ports are identified as: IN, OUT, OUT this is a second distributor.2. Ports of tap are identified as: the IN and OUT, TAP, TAP this is a "second branch.3. The way splitter of signals are the same, for example 306 distributor tha

At present, the main optical divider are planar optical waveguide and fused taper technology two kinds.A brief introduction of the technology of the following two kinds of products.(1) planar waveguide optical divider (PLC Splitter).This device inside divider consists of a light at the ends of the c

In the current integrated wiring products, the distribution frame has a voice distribution frame and a network distribution frame. The default we are talking about today is the network patch panel. In daily contact, we often see these types of patch panels: integrated patch panels, modular patch pan

When the light beam passes through the optical fiber, the quality of the light beam may be better or worse. To understand this conclusion, some basic understanding of optical fiber theory is required. It is recommended to find a special book to read, here are some synopses. For optical fiber, it is

In fact, it has been a long time for the commercial field to run 10 Gigabit Ethernet with Super 6 cables, and the distance can reach 100 meters. It is a false proposition that the 7 cables do not support 10 Gigabit. The bottleneck is actually not the line itself. There are already 900 MHz products f

Sanman said that the lightweight design of wire harnesses is a problem that wire harness engineers have been considering, and the application of aluminum wires has always been a concern for us. Compared with copper wires, what are the disadvantages and advantages of aluminum alloy wires?1 Disadvanta