Question 01 Is it easy for the optical fiber welding machine to indicate that the optical fiber is dirty and needs to be cleaned?Cleaning the optical fiber is the first step of welding, but also a very important step, if the cleaning is not in place, it will bring a lot of trouble to the subsequent

Optical Optical Time-domain reflectometer (OTDR) is a necessary optical fiber testing tool for analyzing the performance of optical fibers by using light backscattering technique. It can test fiber loss and locate breakpoints, splices, and connectors in fiber networks. However, there is a“Blind spot

This paper summarizes the typical on-site cleaning and inspection of fiber optic connectors. The cleaning and inspection of the fiber optic connectors are carried out together. In essence, fiber optic connectors should be fitted before: 1. Check the two tips, and if you're good, go to 5. 2. Clean as

Recently, there seems to be a little too much written about optical fiber. Hehe, this year is the 50th year of the invention of"Low-loss optical fiber." One is to take advantage of this big background to commemorate it, a nod to the industry's big names and top companies, and a nod to the recent OFC

Many people have seen a light cat, many people have only a light cat at home, because some light cats have their own routing function, they use the light cat as a wireless router, but this is a big discount to the wireless network at home, you Can't enjoy the good internet speed you should have. Nex

The optical fiber connection adopts the fusion method. Welding is done by melting the ends of the fiber and connecting the two fibers together, a process similar to wire welding, which is usually accomplished by arc welding, as shown in the following figure: 1, fiber fusion equipment and tools as sh

Optical fiber connection is an important process in optical fiber transmission system with large engineering and high technical requirements. Its quality directly affects the transmission quality and reliability of optical fiber lines. The connection of ADSS fiber optic cable is divided into the fol

Multi-core fiber optic cables are widely used in high density indoor and outdoor applications.In this article, we will discuss some of the differences between branching and wiring cables. Branch VS distribution optical cable both branch optical cable and distribution optical cable consist of 900um S

Understand the OFA: Optical Fiber Amplifier (OFA: Optical Fiber Amplifier) first understand the role of Optical amplifiers in Optical communications. In Fiber-optic communication, light causes loss and dispersion during transmission, which can weaken the signal over long distances. The traditional m

The first is the quality of the wire itself. For example, the wire is not up to standard. The copper core is made of copper clad aluminum or recycled，copper, while the standard twisted pair wire.The quality of the network cable has an impact on the speed of the network, because the material used in