Views: 9 Author: Krystal Publish Time: 2022-05-31 Origin: Site
1. Indoor distribution boxes and cabinets generally require cold-rolled steel plates in line with national standards. The thickness of steel plate is 1.2~2.0mm, among which the thickness of steel plate of switch box body shall not be less than 1.2mm, and the thickness of steel plate of distribution box body shall not be less than 1.5mm. The doors shall be reinforced, and the surface of the box body shall be treated with anticorrosion.
The IP protection level of the distribution box is based on GB/T4942.2-93 "Protection Level of Low-voltage Electrical Appliance Enclosure". Different IP protection levels of the distribution box are selected according to different application technical requirements of the distribution box. Distribution box and switch box should be rainproof and dustproof. The protection level shall not be lower than IP21 when opening the door and IP44 when closing the door.
Distribution box, distribution cabinet shell material selection: generally according to the different role of the product, the selection of materials is also different. It is basically from the use of the product and cost to consider the choice of different materials.
Cold rolled sheet SPCC, mainly used in electroplating and paint parts, low cost, easy to form, material thickness ≤3.2mm.
General structural Steel in JIS series is mainly composed of three parts: the first part represents the material, such as S (Steel) represents the Steel, F (Ferrum) represents the iron; The second part represents different shapes, types and uses, such as P(Plate) for Plate, T (Tube) for Tube,K(Kogu) for tool; The third part represents the characteristic number, which is generally the minimum tensile strength. For example: SS400 -- the first S stands for Steel, the second S stands for "Structure", 400 is the lower limit of tensile strength of 400MPa, and the overall tensile strength of ordinary structural Steel is 400MPa.
Supplement: SPCC-- stands for cold rolled carbon steel sheet and strip, whose chemical composition and mechanical properties are equivalent to Chinese brand Q195 and Q215A. The third letter, C, stands for Cold. To ensure the tensile test, add T at the end of the brand for SPCCT. General structural Steel in JIS series is mainly composed of three parts: the first part represents the material, such as S (Steel) represents the Steel, F (Ferrum) represents the iron; The second part represents different shapes, types and uses, such as P(Plate) for Plate, T (Tube) for Tube,K(Kogu) for tool; The third part represents the characteristic number, which is generally the minimum tensile strength. For example: SS400 -- the first S stands for Steel, the second S stands for "Structure", 400 is the lower limit of tensile strength of 400MPa, and the overall tensile strength of ordinary structural Steel is 400MPa.
Supplement: SPCC-- stands for cold rolled carbon steel sheet and strip, whose chemical composition and mechanical properties are equivalent to Chinese brand Q195 and Q215A. The third letter, C, stands for Cold. To ensure the tensile test, add T at the end of the brand for SPCCT. Japan cold rolled carbon steel sheet applicable brand: SPCC, SPCD, SPCE symbol: Of S-steel, P-plate, C-cold, fourth C-common, D-DRAW and E-deep drawn grades: A - annealing, S- annealing + leveling, 8 - (1/8) of the hard, 4 - (1/4) of the hard, 2 - (1/2) of the hard, 1 - hard. Drawing ability level: ZF -- for the most complex drawing parts, HF -- for the most complex drawing parts, F -- for the complex drawing parts. Surface processing state: D - pockmarked surface (roller after grinding machine shot peening), B - bright surface (roller after grinding machine finishing). Surface quality: FC - advanced finish surface, FB - more advanced finish surface. State, surface finishing state, surface quality code, drawing class (for SPCE only), product specification and size, shape accuracy (thickness and/or width, length, unflatness). Examples of tags: Steel plate, Standard No. Q/BQB402, Grade SPCC, Annealed + flat (S), surface finished as hemp D, Surface quality FB class trimmed (Trimmed EC, untrimmed EM) steel plate, Thickness 0.5mm, Class B accuracy, width 1000mm, Class A accuracy, length 2000mm, Class A accuracy, If the unevenness accuracy is Pf. A, it is marked as: Steel plate ECQ/BQB 402-SPCC-SD-FB/ (0.5B×1000A×2000A-PF.A) Origin: Baosteel, Taiwan, Japan, South Korea pohang 1.5 German cold rolled carbon thin steel plate. Applicable brand: ST12, ST13, ST14, ST15, ST14-T Symbol: ST-Steel (Steel), 12-ordinary grade cold rolled sheet Steel, 13-stamping grade cold rolled sheet Steel, 14-deep drawing grade cold rolled sheet Steel, 15-extra-deep drawing grade cold rolled sheet Steel, 14-T super cold rolled sheet Steel. Surface quality: FC- superior finish surface, FB- superior finish surface. Surface construction: B - extra smooth, G - smooth, M - dull, R - rough. Mark: Product name (steel plate or strip), product standard no., surface quality code, drawing class (only for St14, ST14-T, St15), surface structure, edge state (trimmed EC, not trimmed EM), product specification and size, shape accuracy (thickness and/or width, length, unevenness). Example of marking: Steel plate, Standard No. Q/BQB 403, Grade St14, surface structure is specially smooth (B), surface quality is FC, Trimming (EC), thickness is 0.8mm, Grade A accuracy, width is 1200mm, Grade A accuracy, length is 2000mm, Grade A accuracy, unevenness is Pf.B accuracy, mark as: Q/BQB 403 ST14-FC-ZF-B steel plate EC: 0.8A×1200A×2000A-PF.B Origin: Baosteel, Germany, etc
2. Hot rolled plate SHCC, material T≥3.0mm, also used electroplating, paint parts, low cost, but difficult to form, mainly used flat parts.
3. Copper: mainly conductive materials, its surface treatment is nickel plating, chromium plating, or no treatment, high cost.
4 stainless steel: mainly used without any surface treatment, high cost. Aluminum plate generally uses surface chromate (J11-A), oxidation (conductive oxidation, chemical oxidation), high cost, silver plating, nickel plating.
5. Aluminum profile: material with complex cross section structure, widely used in various boxes. Surface treatment with aluminum plate. Galvanized sheet SECC, SGCC. SECC electrolytic plate N material, P material, N material is not mainly surface treatment, high cost, P material for spraying parts.