Optical transmission hardware integration one-stop service provider
Views: 0 Author: Tina Publish Time: 2026-09-30 Origin: Site
When designing outdoor telecommunication links in lightning-prone regions, near high-voltage power lines, or inside crowded municipal conduits, metallic cables often introduce grounding complexities and electromagnetic interference (EMI). Selecting a high-performance GYFXY fiber cable provides an ideal all-dielectric solution. Engineered with a compact 6.0 mm6.0 mm outer diameter, dual parallel Fiber Reinforced Plastic (FRP) strength members, and a water-blocked central loose tube, this non-metallic cable delivers outstanding tensile strength, lightning immunity, and effortless duct pulling for modern access networks.
A GYFXY fiber cable is an all-dielectric, non-metallic central uni-tube outdoor optical cable engineered for duct and aerial access installations where metallic components must be avoided.
Unlike traditional armored cables that use steel tape or metallic wires, the GYFXY design contains zero metal. This completely eliminates the risk of lightning-induced electrical surges, electrical tracking, and magnetic interference, making it safe for deployment alongside high-voltage power conduits and electrified railway tracks.
Embedded symmetrically within the outer jacket are two 1.0 mm1.0 mm Fiber Reinforced Plastic (FRP) rods. These non-metallic strength members provide essential axial tensile rigidity and anti-buckling resistance while maintaining exceptional flexibility and lightweight handling during installation.
At the center of the cable sits a 2.2 mm2.2 mm high-modulus Polybutylene Terephthalate (PBT) loose tube containing 12 color-coded ITU-T G.652.D single-mode optical fibers. The loose tube is completely injected with thixotropic water-blocking filling compound to prevent longitudinal water penetration and micro-bending attenuation.
The assembly is extruded with a 1.9 mm1.9 mm Medium-Density Polyethylene (MDPE) black outer jacket. The smooth MDPE compound offers superior UV resistance, environmental stress-crack resistance (ESCR), and low surface friction during conduit pulling.
When reviewing product datasheets for access network design, verify that the cable conforms to IEC 60794 optical fiber cable standards:
Optical Attenuation: Exceptional transmission performance with attenuation ≤0.36 dB/km≤0.36 dB/km at 1310 nm1310 nm and ≤0.22 dB/km≤0.22 dB/km at 1550 nm1550 nm.
Compact Outer Dimensions: Slim outer diameter of 6.0 mm±0.3 mm6.0 mm±0.3 mm, optimizing duct space utilization.
Tensile Performance: Short-term tensile rating of 800 N800 N (installation pull load) and long-term operating rating of 400 N400 N.
Crush Resistance: Short-term crush resistance of 1000 N/10cm1000 N/10cm and long-term operating resistance of 300 N/10cm300 N/10cm.
Bending Flexibility: Dynamic installation bending radius ≥20D≥20D (120 mm120 mm) and static operating bending radius ≥10D≥10D (60 mm60 mm).
Operating Temperature Range: Built for rugged environments from −40℃−40℃ to +70℃+70℃ (installation window from −20℃−20℃ to +60℃+60℃).
Standard 12-Color Sequence: Blue, Orange, Green, Brown, Gray, Natural/White, Red, Black, Yellow, Purple, Pink, Aqua.
Deploying a GYFXY fiber cable offers distinct engineering advantages across three primary installation environments:
With its smooth round profile and slim 6.0 mm6.0 mm footprint, GYFXY glides easily through PVC sub-ducts, HDPE pipes, and congested micro-ducts with minimal pulling friction. It terminates cleanly into outdoor and without requiring dedicated grounding kits.
Because the cable is completely non-conductive, it can be routed directly within power utility substations, transformer yards, and alongside electric railway tracks without risk of ground loops, spark discharge, or electro-corrosion.
For campus distribution and short aerial spans between buildings, GYFXY provides a lightweight, easy-to-strip drop cable solution that reduces structural load on pole hardware and simplifies field splicing.
Specification / Parameter | GYFXY Cable | GYXTW Cable | GYFXTY Cable |
|---|---|---|---|
Strength Member | Dual Parallel FRP Rods (1.0mm1.0mm) | Dual Parallel Steel Wires | Non-Metallic Central / Side FRP |
Armor Layer | All-Dielectric (No Armor) | PSP Corrugated Steel Tape | All-Dielectric (No Metal) |
Outer Diameter | Compact ≈6.0 mm≈6.0 mm | ≈8.0 mm≈8.0 mm | ≈7.0 mm≈7.0 mm |
Lightning & EMI Immunity | 100% Immune (Non-Metallic) | Metallic (Requires Grounding) | 100% Immune (Non-Metallic) |
Jacket Material | Black MDPE (1.9mm1.9mm) | Black PE Sheath | PE / LSZH Sheath |
Primary Deployment | Conduits, Substations, FTTH | Direct Buried, Ducts, Aerial | Duct Pulling, Power Corridors |
Selecting the right GYFXY fiber cable comes down to prioritizing lightning safety, non-conductive reliability, and compact conduit efficiency. With its dual FRP reinforcement, 12-core G.652.D single-mode fibers, and robust MDPE jacket, GYFXY delivers a cost-effective, maintenance-free optical backbone for telecom operators and enterprise networks.
