1. Low-loss optical fiber connectionTwo optical fibers often need to be connected to transmit light. For this purpose, the fiber ends must be very close together, the core must be perfectly aligned, and the fiber ends must be fixed to maintain alignment. The mechanical connector is equivalent to a s

There are many kinds of optical fiber, but for people who do not often use optical fiber, many specifications are really quite troubling. Sometimes, because they are not familiar with optical fiber specifications or are not clear about the wire required by the equipment, they will make the choice ve

In the cabling industry, the battle between optical fiber and copper cable has been going on for more than a decade now with cloud computing 5 g new business constantly emerging, such as data center scale unceasingly expands, its architecture and wiring is becoming more and more complex, and the opt

MPO fiber jumper. The MULTI-Fiber PushOn (MPO) connector is one of the MT series connectors. The MT series connectors use two 0.7mm diameter guide holes on the end face of the core to accurately connect the guide PIN (also called the PIN). MPO connector and fiber optic cable processing can produce v

This article mainly introduces the cables that should be used for 10G transceiver modules.

This article gives us a brief introduction to HDMI MHL Cable.

This article introduces 4k HDMI Cables to us and puts forward some purchase suggestions.

This article answers some questions about DisplayPort.

This article tells us what Ethernet is, and briefly introduces the differences and connections between Ethernet and optical fiber.

This article introduces us to BBB and something about using it.