The small residual length of the communication fiber is the key to process control in the production process of the plastic coating process. The so-called residual length is: the difference between the optical fiber length and the loose sleeve length and the fraction of the loose sleeve length: As

Steel StrandA steel product called steel strands is created by twisting lots of steel wires together. Galvanized, zinc-aluminum alloy, aluminum, copper, epoxy resin, and other coatings can be put to the surface of carbon steel as needed. According to the number of steel wires

1、From the design point of view Comprehensive wiring has a point requirement if you have noticed, that is, the information point requires data, voice points can be interchanged when necessary

Fiber optic network speed is indeed fast, long-distance transmission, can achieve the real one gigabit network speed. So, in our home LAN, between the computer and the router, why not use optical fiber to connect? Well, some people compare optical fiber to a highway, the home LAN to a small village,

In the modern communication industry, communications, optical fiber transmission technology as a kind of common information data transmission mode, since it has advantages of high efficiency and high transmission speed, communication quality, greatly satisfy the demand of modern social development,

In the long-term transmission line operation and maintenance process, the heat of the line clip is the main defect of the line. Transmission line clamps are mainly equipment clamps, tension-resistant clamps, and trench clamps, etc. The following is based on the field operation and maintenance, for t

The difference between optical cable fittings and electric power fittings:Power fittings is a kind of metal fittings that connects and combines all kinds of fittings in power system.Optical cable hardware is the overhead cable used in the field of optical cable hardware, as well as direct contact op

When an optical fiber is stretched beyond its tensile limit, it breaks. The fiber optic cable structure increases the strengthening member, the fiber optic cable required tensile strength, mainly by the strengthening member to bear. In the process of construction, the traction should not exceed the

If you want to ask the foreign trade industry bosses are most concerned about the problem, then customer conversion rate must be an unavoidable topic. Foreign trade customer development has the characteristics of long transaction cycle, complex transaction process, large personnel changes . Limited

How to deal with your“Zombie” customers, we often encounter the daily work of collating and analyzing customer data, we will be based on customer activity, customers will be divided into zombie customers and active customers. An active customer is a customer who responds effectively when we have a b